Filter
Top Products
17
In the track-up view, the present
position moves straight towards
the top of the display. Remember,
in the track-up mode, the screen
rotates as you change direction. It
always keeps your direction of
travel (track) heading towards the
top of the screen.
In the course-up mode, the screen
is locked into your original bearing
to the recalled waypoint, regard-
less of your track.
To select the desired mode, first
press the MENU key, then select
“Map Orientation”, then select the
desired mode. Press the EXIT key
to erase this menu.
TRACK-UP
COURSE-UP
Auto Zoom
This receiver has an autozoom feature that eliminates much of the button
pushing that competitive units force you to make. It works in conjunction
with the navigation features. First, recall a waypoint. (See the waypoint
section for more information on navigating to a waypoint.) Then, with the
autozoom mode on, the unit zooms out until the entire course shows,
from the present position to the destination waypoint (recalled waypoint).
As you travel towards the destination, the unit automatically begins zoom-
ing in, one zoom range at a time, keeping the destination on the screen.
To turn this featue on, press the MENU key, then highlight “Auto Zoom”
using the arrow keys. Press the ENT key to activate it. Press the EXIT key
to erase the menus. Repeat these steps to turn it off.