Filter
Top Products
86 |
Radar | Lowrance HDS Gen2 Touch
Dening an EBL/VRM marker
1. Ensure that the cursor is not active on the radar page
2. Tap EBL/VRM on the radar menu
3. Select an EBL/VRM.
4. Tap adjust to select EBL/VRM position
5. Drag the EBL/VRM into the desired location
6. Tap Save EBL/VRM
Quick EBL/VRM marker positioning by using the cursor
1. Tap the radar page to position the cursor
2. Tap Place EBL/VRM1 or EBL/VRM2
- The EBL line and the VRM circle will be positioned ac-
cording to the cursor position
3.
Tap the EBL/VRM menu button again to reposition the EBL/VRM.
EBL/VRM settings
Adjust
Tap Adjust and drag your finger in any direction on the screen to
resize the VRM and change the location of the EBL.
Set oset
Used to change the PPI center of the EBL/VRM. Tap Set offset and
tap the desired location on the screen.
Data box
Turns on/off onscreen EBL/VRM information box.
Setting a guard zone around your vessel
A guard zone is an area (either circular or a sector) that you can
define on the radar image. When activated, an alarm will alert you
when a radar target enters or exits the zone.