Filter
Top Products
50 | | 51
Sonar | Lowrance HDS Gen2 Touch Sonar | Lowrance HDS Gen2 Touch
Stop sonar
Allows you to closely examine sonar echoes, precisely position a
waypoint or stop interference between transducers on your boat.
When sonar is stopped, no sonar history will be recorded.
This function is also useful when using the cursor to measure a
distance between two elements on the screen.
Pausing sonar
You can pause sonar by tapping the screen. When sonar is paused,
sonar history will still be recorded.
Sonar settings
Network sonar
You can share the sonar images from this unit with other units
connected to the network.
For more information about how to set up a sonar network, refer to
the separate HDS Gen2 Touch Installation manual.
Sonar source
If you have more than one sonar on your Ethernet network, you
can select which unit will be the sonar source for other units on the
network.
1.
Turn on Network sonar for each sonar unit on the network.
2. Clear the cursor from the sonar page
3. Tap the Source on the Sonar menu to toggle the sonar source between
“this unit” and other units on the network.
4. Turn off Network sonar to stop sharing sonar.