Filter
Top Products
84 |
Radar | Lowrance HDS Gen2 Touch
Rain Clutter
Rain clutter is used to reduce the effect of rain, snow or other
weather conditions on the radar image.
Adjust the value by vertically dragging the rain clutter slide bar.
The value should not be increased too much as this may filter out
real targets.
Interference rejection
Interference could be caused by radar signals from other radar units
operating in the same frequency band.
A high setting will reduce the interference from other radars. The
medium setting offers the best overall performance. When there is
no interference, the low setting prevents you from missing weaker
targets.
In order to not miss weak targets, the interference rejection should
be set low when no interference exists.
Position
You can shift the radar PPI center to different positions on the radar
page to see further in any direction.
The radar position can only be changed when the radar is
transmitting.
Center
Default setting. The radar PPI center is centered on the radar panel.
Look Ahead
Moves the radar PPI center to the bottom of the panel to give maxi-
mum view ahead.
Oset
Allows you to move the PPI center to any location on the radar
page.