Lowrance electronic 10761001 GPS Receiver User Manual


 
| 37
Navigating | Lowrance HDS Gen2 Touch
Navigating
The navigation function included in your unit allows you to navigate
towards the cursor position, a waypoint or along a predefined route.
For information about positioning waypoints and creating routes,
refer to “Waypoints, routes & trails” on page 32.
Goto cursor
You can navigate to the cursor from the chart, radar, sonar or struc-
ture pages by activating the cursor and tapping Goto cursor on
the menu.
¼ Note: The Goto cursor option will only be available when the cursor
is active on a page.
Navigating on the chart
Navigate a route
You can start navigating a route by tapping the route and then
tapping Navigate on the menu.
Routes can be navigated forward, from the first routepoint to the
last routepoint, or in reverse starting with the last routepoint and
finishing with the first routepoint.
When navigating a route, the active route leg will be colored red.
The red arrow on the route leg shows the selected navigation
method (forward or reverse) you are using to navigate the route.
Upcoming route legs are colored orange.
6