Filter
Top Products
| 71
Alarms | Lowrance HDS Gen2 Touch
Acknowledging an alarm
The following options are available in the alarm dialog for
acknowledging a message:
Option Result
Close
Sets the alarm state to acknowledged, meaning that you are aware of the
alarm condition. The siren will stop and the alarm dialog will be removed.
The alarm will however remain active in the alarm listing until the reason
for the alarm has been removed.
Disable
Disables the current alarm setting. The alarm will not show again unless
you turn it back on in the Alarms dialog.
There is no time-out on the alarm message or siren. These remain
until you acknowledge it or until the reason for the alarm is removed.