Filter
Top Products
The power liftgate feature can be enabled or disabled using the message
center controls. With the setting turned off, power operation is disabled
from the liftgate handle button and from the rear cargo area button. The
integrated keyhead transmitter and instrument panel switch will still
continue to operate the liftgate regardless of the position state of the
message center. Refer to Message center in the Instrument Cluster
chapter.
To power open or close the
liftgate from the instrument
panel:
Press the button, located to the left
of the steering column, once to
power open or close the liftgate.
To power open or close the liftgate with the remote entry
transmitter:
Press
twice within three seconds to power open or close the liftgate.
Refer to Remote entry system in the Locks and Security chapter.
To power open the liftgate with
outside liftgate control button:
1. Unlock the liftgate with the
remote entry transmitter or power
door unlock control.
2. Press the control button located
on the surface above the license
plate.
Note: For the best performance
allow the power system to open the
liftgate after pressing the control. Manually pushing or pulling the liftgate
may activate the system’s obstacle detection feature and stop the power
operation.
Driver Controls
145
2010 MKT (mkt)
Owners Guide, 3rd Printing
USA (fus)