Filter
Top Products
INSTRUMENT PANEL DIMMER CONTROL
Use to adjust the brightness of the instrument
panel during headlight and parklamp operation.
• Push up to brighten.
• Push down to dim.
AUTOLAMP CONTROL
The autolamp system provides light
sensitive automatic on-off control of
the exterior lights normally
controlled by the headlamp control.
The autolamp system also keeps the
lights on for a preselected period of
time after the ignition switch is
turned to OFF.
• To turn autolamps on, push the
control up toward the MAX position. As you press this switch, the
autolamp system’s status will be displayed in the message center. The
system can be set to provide light for up to three minutes after you
turn the ignition OFF.
• To turn autolamps off, push the control down toward OFF.
CLIMATE CONTROL SYSTEM
Electronic Automatic Temperature Control (EATC) system
The EATC system will maintain a
selected temperature and
automatically control airflow. You
can override automatic operation
with any of the override controls,
the fan speed control or the steering
wheel controls (if equipped).
Turning the EATC on
Press AUTO, any of the override
controls or the fan speed control.
The EATC will only operate when
the ignition is in the ON position.
PANEL
DIM
MAX
OFF
AUTO
LAMP
˚
F
AUTO
EXT OFF AUTO
MAX
A/C
FRONT
REAR
˚
F
AUTO
EXT OFF AUTO
MAX
A/C
FRONT
REAR
Controls and features
27