Filter
Top Products
If your battery has a cover/shield, make sure it is reinstalled
after the battery is replaced.
Because your vehicle’s engine is electronically controlled by a computer,
some control conditions are maintained by power from the battery. When
the battery is disconnected or a new battery is installed, the engine must
relearn its idle conditions before your vehicle will drive properly. To
begin this process:
1. Put the gearshift in P (Park), turn off all accessories and start the
vehicle.
2. Let the engine idle for at least one minute.
3. The relearning process will automatically complete as you drive the
vehicle.
• If you do not allow the engine to relearn its idle, the idle quality of
your vehicle may be adversely affected until the idle is eventually
relearned.
• If the battery has been disconnected or a new battery has been
installed, the clock and the preset radio stations must be reset once
the battery is reconnected.
• Always dispose of automotive
batteries in a responsible manner.
Follow your community’s
standards for disposal. Call your
local recycling center to find out
more about recycling automotive batteries.
Maintenance and care
137