Filter
Top Products
OPERATION INSTRUMENTS
»
ENGLISH
6
A
B
C
Combination switch
The light switch has 2, respectively 3 switch positions.
[A] = Light off (this function is not available in all models)
[B] = Low beam on
[C] = High beam on
You may use button [3] to actuate the horn.
The red short circuit button [4] serves to switch off the engine. Leave the
switch pressed until the engine stops.
34
Hand brake lever
The hand brake lever [1] is mounted on the handlebars on the right and
actuates the front wheel brake. The adjusting screw [A] can be used to change
the basic position of the hand brake lever (see "Maintenance").
1
A
Short circuit button
The short circuit button [2] turns off the engine. When pressing this button,
the ignition circuit is short-circuited.
2
Headlamp switch (XCF-W)
In this model the headlamp is switched on with the pull switch [5].
5
Flasher switch
The flasher switch is a separate unit and is mounted on the left portion of the
handlebar.
The wire harness is designed in a way that whenever you want to use your
bike off-road, you can dismount the entire turn indicator system without
affecting the function of the remaining electrical system.
Flasher left
Flasher right