Filter
Top Products
ENGLISH
13
Check the following before each start
When you start, the motorcycle must be in perfect mechanical condition.
For safety reasons, you should make a habit of performing an overall check
of your motorcycle before each start.
The following checks should be performed:
1 CHECK OIL LEVEL
Insufficient oil results in premature wear and consequently to engine
damage.
2 FUEL
Check that there is sufficient fuel in the tank; when closing the filler cap,
check that the tank venting hose is free of kinks.
3 CHAIN
A loose chain can fall from the chain wheels; an extremely worn chain
can tear, and insufficient lubrication can result in unnecessary wear of
chain and chain wheels.
4 TIRES
Check for damaged tires. Tires showing cuts or dents must be replaced.
The tread depth must comply with the legal regulations. Also check the air
pressure. Insufficient tread and incorrect air pressure deteriorate the dri-
ving performance.
5 BRAKES
Check correct functioning of the braking system. Check for sufficient
brake fluid in the reservoir. The reservoirs have been designed in such a
way that brake fluid does not need to be refilled even when the brake
pads are worn. If the level of brake fluid falls below the minimum value,
this indicates a leak in the braking system or completely worn out brake
pads. Arrange for the braking system to be checked by a KTM specialist,
as complete failure of the braking system can be avoided.
Also check the state of the brake hose and the thickness of the brake
linings.
Check free travel at hand brake lever and foot brake lever.
6 CABLES
Check correct setting and smooth operation of all control cables.
7 COOLING FLUID
Check the level of cooling fluid when the engine is cold.
8 ELECTRICAL SYSTEM
Check correct operation of headlamps, tail-lights, brake lights, indicators,
control lamps and horn while the engine is running.
9 LUGGAGE
If you are taking luggage with you, check that this is securely fastened.
DRIVING INSTRUCTIONS