Kenwood DNX571EX GPS Receiver User Manual


 
87
Return to the Top page
Bluetooth Control
Using Hands-Free Unit
You can use telephone function by
connecting the Bluetooth telephone to this
unit.
Making a call
1 Press the <TEL> button.
Hands Free screen appears.
NOTE
• When registration of your cell-phone is
completed, the phone book of the cell-phone is
automatically downloaded to this unit.
• Up to 600 phone numbers can be registered for
each registered cell-phone.
• Up to 30 digits can be registered for each
phone number along with up to 127 characters
representing a name. (127 is the number of
alphabetical characters. Fewer characters can be
input depending on the type of characters.)
• Depending on the type of your cell-phone, the
following restrictions are placed;
• The phonebook data cannot be downloaded
normally.
• Characters in the phonebook are garbled.
• To cancel downloading the phonebook data,
operate the cell-phone.
2 Select a dialing method.
See the following table for each method.
Select the cell-phone to use
1 Touch [
] (cell-phone name
display).
Call by entering a phone number
1 Touch [
].
2 Enter a phone number with number keys.
3 Touch [
].
Call using call records
1 Touch [
], [ ], or [ ].
2 Select the phone number from the list.
3 Touch [
].
Call using the phonebook
1 Touch [
].
2 Select the name from the list.*
1
*
2
3 Select the number from the list.
4 Touch [
].
Call using the preset number
1 Touch [Preset #] to start calling the
corresponding phone number.
2 Touch [
].
Bluetooth SETUP
1 Touch [
].
Bluetooth SETUP screen appears.
When you connect two cell-phones
• Touch [ ] to select the phone you
want to use.
Continued