Kenwood DNX571EX GPS Receiver User Manual


 
7070
Return to the Top page
SiriusXM Operation
SiriusXM® Basic Operation
Most functions can be controlled from the source control screen.
Before use
• SiriusXM® Satellite Radio operation requires the connection of the optional SiriusXM Connect Vehicle Tuner and
service. To activate the SiriusXM Connect Vehicle Tuner, you will need the Radio ID.
• Make a note of your Radio ID: For each SiriusXM Connect Vehicle Tuner, peculiar Radio ID is assigned. To confirm
your Radio ID, tune to channel 0. The letters I, O, S and F are not used in any Radio ID.
The Radio ID is also located on the label of the SiriusXM Connect Vehicle Tuner.
• How to activate your SiriusXM Service: Go to www.siriusxm.com/activatenow or call 1-866-635-2349 to activate
your SiriusXM Vehicle Connect Tuner.
To activate SiriusXM Canada service go to www.xmradio.ca and click on “ACTIVATE RADIO” in the top right corner,
or call 1-877-438-9677
NOTE
• Set the remote control mode switch to AUD mode before starting operation, see Switching the operation mode
(P.121).
• To use SiriusXM® Satellite Radio, the optional accessory is necessary.
• SiriusXM® Satellite Radio are for North American sales area only.
Simple Control screen List Control screen
7
5
6
8
1
2
2
3
3
4
4
1 Signal Strength indication
Displays the received signal strength of the SiriusXM tuner.
2 Information display/Control switching area
Displays the following information.
[SXM1], etc.: Band display
Preset #: Preset number
#CH: Channel display
Logo: Channel logo display
Touch to switch between the Simple Control and List Control screen.
3 Multi function key
Touch to switch the multi function menu. For details on the menu, see Multi function menu (P.71).
SiriusXM® Operation