Filter
Top Products
Assembly
• Stand the vehicle body on its
rear wheels.
• Fit the fairing onto the front of the
swivel bracket.
• Align the screw holes in the front
of the fairing with the holes in the
swivel bracket.
• Insert two #8 x 1
1
/
2
" screws into
the fairing.
• Tighten the screws with a Phillips
screwdriver. Do not over-tighten.
9
Swivel Bracket
Fairing
Windshield
Fairing
• Turn the fairing over.
• Insert two #6 x
3
/
8
" screws into the
holes in the two long windshield
tabs.
• Tighten each screw with a Phillips
screwdriver. Do not over-tighten.
8
#6 x
3
/
8
" Screw – 2
Shown Actual Size
15
#8 x 1
1
/
2
" Screw – 2
Shown Actual Size
Long Windshield Tabs