Filter
Top Products
12
Basic DVD Operations
This manual mainly explains operations using the buttons on
the remote control. You can also use the buttons on the center
unit if they have the similar names (or marks) as those on the
remote control.
If operations using the center unit are different from those
using the remote control, they are then explained.
1
Turn On the Power
Before turning on the system, turn on your TV and select the correct
video input. (See the manual supplied with your TV.)
• When you use a JVC’s TV, you can turn on your TV by pressing
TV
on the remote control, and select the video input by
pressing TV/VIDEO. (If your TV is not a JVC’s, see “Operating
Other Manufacturers’ TV” on page 57.)
• For changing the OSD messages—the information on the TV
screen—into the desired language, see “ Language Menu” on
pages 51.
Press AUDIO
(or STANDBY/ON on the front
panel).
The STANDBY lamp goes off and the illumination lamp
on the center unit lights up. The source indication
selected previously appears on the display.
2
Select the Source
Press DVD.
The source changes to DVD.
3
Load a DVD
On the front panel ONLY:
Press 0 to open the disc tray, then place a DVD
correctly with its label side up.
• DO NOT use the disc stabilizer.
4
Start Playback
Press 3.
The disc tray closes. “READING” appears for a
while.
• You can also start playback by closing the disc
tray using 0 on the front panel.
5
Adjust the Volume
From the remote control :
To increase the volume,
press and hold AUDIO VOL +.
To decrease the volume,
press and hold AUDIO VOL –.
On the front panel :
To increase the volume,
turn VOLUME control clockwise.
To decrease the volume,
turn VOLUME control counterclockwise.
CAUTION:
Always set the volume to the minimum before starting any source. If
the volume is set at its high level, the sudden blast of sound energy
can permanently damage your hearing and/or ruin your speakers.
Notes:
• By pressing AUDIO VOL + or – repeatedly, you can adjust the
volume level step by step.
• The volume level can be adjusted within 64 steps—
“MIN (minimum),” 01 to 62, and “MAX (maximum).”
• If you have turned off the unit with the volume level set at more than
level “25,” the volume level will be automatically set at level “25” next
time you turn on the unit.
AUDIO
CORRECT INCORRECT
AUDIO VOL
• For in-depth information about DVD operations, see
pages 24 to 33.
1234
5678
9
TV
VCR
0
STANDBY/ON
AUDIO
VCRTV
CENTER
REAR-RREAR-L
DVD FM/AM
CONTROL
AUX
TV/VIDEO
MUTING
REC/MEMORY
SEARCH
TOP
MENU
MENU
CHOICE
DOWN - TUNING - UP
SLOW
AUDIO
RETURN DIMMER DSP
SLEEP
RM-STHA35U
DVD CINEMA SYSTEM
SURROUND
SUB TITLE ANGLE ZOOM
ON SCREEN
CLEARTEST SETTINGFM MODE
SUBWOOFER
TV VOL
AUDIO VOL
SOUND
ENTER
PROGRESSIVE
DVD
1
AUDIO
TV
5
AUDIO VOL
+/–
TV/VIDEO
6
SURROUND
7
7
MUTING
4
3
2
DVD
VOLUME
6
DSP
EN10-20TH-A35[A].pm6 03.5.12, 7:27 PM12