Filter
Top Products
40
Manufacturer Codes
JVC 01, 02
Amstrad 03, 04, 05, 06, 33
BT 01
Canal Satellite 22
Canal + 22
D–Box 26
Echostar 19, 20, 21, 23
Finlux 11
Force 30
Galaxis 29
Grundig 07, 08
Hirschmann 07, 19, 39
ITT Nokia 11
Jerrold 16
Kathrein 13, 14, 36
Luxor 11
Mascom 34
Maspro 13
Nokia 26, 28, 35
Pace 10, 27, 33
Panasonic 15
Philips 09, 25
RFT 12
Saba 37
Sagem 24, 31
Salora 11
Selector 31
Skymaster 12, 38
Thomson 37
TPS 24
Triax 32
Videoway 17, 18
Wisi 07
Initial setting: 01
Manufacturers’ codes for STB
Manufacturers’ codes are subject to change without
notice. If they are changed, this remote control cannot
operate the equipment.
Operating other manufacturers’ products
❏ Changing the transmittable signals for operating
an STB
Set the mode selector to “AUDIO/TV/VCR/STB.”
1
Press and hold STB .
2
Press STB CONT.
3
Enter the manufacturer’s code using buttons
1 – 9, and 0.
See “Manufacturers’ codes for STB” on the right.
4
Release STB .
Now, you can perform the following operation on the STB.
STB : Turn on or off the STB.
After pressing STB CONT, you can perform the following
operations on the STB.
CHANNEL +/–: Change the channel numbers on the
STB.
1 – 9, 0: Select the channel numbers on the
STB.
See the instructions supplied with the STB for details.
5
Try to operate your STB by pressing STB .
When your STB turns on or off, you have entered the correct
code.
If more than one code is listed for your brand of STB, try each
one until the correct one is entered.
36-40RX-F10[B]_f.p65 04.2.13, 16:4140