Filter
Top Products
35
Creating realistic sound fields
On the front panel:
Before you start, remember...
There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step
2
again.
1
Select and play any source other than “DVD
MULTI.”
• Make sure you have selected the input mode (analogue or
digital) correctly.
2
Press SURROUND.
MULTI JOG now works for selecting Surround/DSP modes.
3
Turn MULTI JOG to select the Surround/DSP
mode you want.
Ex.: When “DOLBY D” is selected for Dolby Digital multi-
channel software:
To cancel Surround/DSP modes
Turn MULTI JOG so that “SURRND OFF” appears on the display.
Activating the Surround/DSP modes
Available Surround/DSP modes vary depending on the speaker
settings and the incoming signals. For details, see page 34.
Activating one of the Surround/DSP modes for a source
automatically recalls the memorized settings and
adjustments.
• To adjust the speaker output level, see page 23.
• To adjust the effect level for the DSP mode (except All
Channel Stereo mode), see page 23.
• To add “wraparound” sound effect to “PLII MUSIC”
(PANORAMA control), see page 23.
• To adjust the sound localization of the center channel
for “NEO:6 MUSIC” (center gain), see page 24.
NOTES
• You cannot use any Surround/DSP modes when selecting “DVD
MULTI” as the playback source.
• You cannot select All Channel Stereo mode if the surround
speakers are set to “NO” in the speaker setting (see page 18).
If “AUTO SURRND (Auto Surround)” is set to “ON”
You can enjoy Surround mode simply by playing back multi-
channel software (with digital input selected for that source).
To activate Auto Surround, see page 21.
From the remote control:
When operating the receiver using
the remote control, set the mode
selector to “AUDIO/TV/VCR/STB.”
1
Select and play any source other than “DVD
MULTI.”
• Make sure you have selected the input mode (analogue or
digital) correctly.
2
Press SURROUND repeatedly to select the
Surround/DSP mode you want.
Ex.: When “DOLBY D” is selected for Dolby Digital multi-
channel software:
To cancel Surround/DSP modes
Press SURROUND repeatedly so that “SURRND OFF” appears
on the display.
1
2
EQ
LPCM L
LS SB RS
S . WFR
PL
NEO : 6
DSP 3D
LFE
CR
DOLBY D
DTS AAC
96 / 24
AUTO SR
C.TONE VIRTUAL SB AUDIO P. BASS TA NEWS INFO RDS TUNED ST SLEEP
AUTO MUTING AUTO MODE
ATT
HP
MHz
kHz
EQ
LPCM L
LS SB RS
S . WFR
PL
NEO : 6
DSP 3D
LFE
CR
DOLBY D
DTS AAC
96 / 24
AUTO SR
C.TONE VIRTUAL SB AUDIO P. BASS TA NEWS INFO RDS TUNED ST SLEEP
AUTO MUTING AUTO MODE
ATT
HP
MHz
kHz
2
1, 3
31-35RX-F10[B]_f.p65 04.2.13, 16:4135