JVC LVT2141-001B GPS Receiver User Manual


 
ENGLISH
90
Troubleshooting/error messages
Symptoms Remedies/Causes
Satellite radio
“Channel Off Air” (XM) Selected channel is not broadcasting at this time.
“Loading” (XM) The unit is loading the channel information and audio.
Text information are temporarily unavailable.
“Acquiring Signal” (SIRIUS)
“No Signal” (XM)
Signals cannot be received. Move to the place where the
System receives the satellite radio signals.
“Check XM Tuner” (XM) The XM Mini tuner is not connected. Connect the tuner.
“No Antenna” (SIRIUS)
“Check Antenna” (XM)
Connect the antenna firmly.
“Reset 08” Reconnect this unit and the Satellite radio correctly, and
detach the monitor panel then attach it.
AV-IN/Front Aux
“No Signal” Turn on the external component if it is not on.
Connect the external component correctly.
• Check whether <AV Input> setting is correct for “AV-
IN”. ( page 71)
Bluetooth
Bluetooth device does not detect the unit. This unit can be connected with one Bluetooth device at
a time.
While connected to a device, this unit cannot be detected
from another device. Disconnect currently connected
device and search again.
The unit does not detect the Bluetooth device. Check the Bluetooth setting of the device.
Echo or noise occurs. Adjust the microphone unit position.
Phone sound quality is poor. Reduce the distance between the unit and the
Bluetooth mobile phone.
Move the car to place where you can get a better signal
reception.
The sound is interrupted or skipped while using
a Bluetooth audio player.
Reduce the distance between the unit and the
Bluetooth audio player.
Disconnect the device connected for Bluetooth phone.
Turn off, then turn on the unit.
(When the sound is not yet restored) connect the player
again.
The connected audio player cannot be
controlled.
Check whether the connected audio player supports
AVRCP (Audio Video Remote Control Profile).
The unit does not response when you tried to
copy the phone book to the unit.
You may have tried to copy the same entries (as stored)
to the unit.
EN_KW-NT3[J]f.indb 90EN_KW-NT3[J]f.indb 90 10.4.2 0:58:06 PM10.4.2 0:58:06 PM