Filter
Top Products
p
6
7
8
9
q
w
e
r
t
5
2
3
4
1
38
ENGLISH
Checking the information of the navigation system
8 Version of the map database
9 Serial number
p Connection status of the illumination control lead
<On>: The illumination signal is detected.
q Connection status of the parking brake lead
<On>: The parking brake is engaged.
w Connection status of the reverse gear signal lead
<On>: Reverse gear signal is detected.
• If the rear view screen is displayed when shifting
the gear to the reverse (R) position, the reverse
gear signal is detected (<On>).
e Status of the gyroscope
r Speed pulse rate
t Status of calibration *
2
*
3
<Processing>: The current position cannot be
determined without data from GPS satellites.
<Learning>: The current position can be
determined even when the System cannot receive
data from GPS satellites.
<Learned>: The current position can be
determined accurately even when the System
cannot receive data from GPS satellites.
*
1
These information may not be shown correctly when
the reception of GPS signals is poor.
*
2
The calibration does not function without the
connection of GPS antenna and the speed signal
lead. For the connection, ☞ Installation/Connection
Manual (separate volume).
*
3
Driving under various conditions completes the
calibration faster. If <Processing> remains on the
screen for long period, check the connection of the
GPS antenna and the speed signal lead.
GPS
1 Current speed *
1
2 Direction of the car *
1
3 Latitude and longitude of your current position *
1
4 Altitude of your current position *
1
5 Date/Local time
• When the System cannot receive the GPS signals, the
value of each item above are shown as “- -.”
System
6 Name of the unit
7 Version of the software
Satellites
(Green): Receiving the GPS signals and used for the
positioning.
(Yellow): Receiving the GPS signals.
(Gray): Not receiving the GPS signals.
EN_KW-NT3[J]f.indb 38EN_KW-NT3[J]f.indb 38 10.4.2 0:57:04 PM10.4.2 0:57:04 PM