JVC KW-NT500HDT GPS Receiver User Manual


 
84
ENGLISH
System settings items
Menu items Selectable settings Initial: Underlined
Connection
Antenna Remote Auto: Antenna remote output is always on.
Manual: Allows user to turn on/off antenna remote output.
( page 13)
Camera Input
The setting varies depending on the installation settings ( page 11).
On, Off ( page 108)
AV Input You can determine the use of the LINE IN and VIDEO IN jacks.
AV: Select when connecting an AV component such as a camcorder.
Audio: Select when connecting an audio component such as a portable
audio player.
Off *: Select when no component is connected. When set to Off, <AV-
IN> cannot be selected.
Front AUX Input On: Select when connecting an audio component to the AUX input
terminal on the monitor panel.
Off *: Select when no audio component is connected. When set to Off,
<Front AUX> cannot be selected.
Others
Beep On: Activates the key-touch tone.
Off: Cancels.
Shortcut Button Displays the screen to assign your most frequently used features to
shortcut buttons. ( page 13)
Security Indicator If you enable the security indicator, it flashes when the unit is turned off
as an antitheft measure.
On, Off ( page 10).
Restore Factory Default Initialize all settings you have made. Press [Restore] to initialize the
settings.
When restoring the settings, adjust the settings on installation
setting screen ( page 11).
Demonstration Mode This setting will be deactivated and disappear from the menu when the
System detects the first car movement.
On, Off
* Not selectable when the input is selected as the source.