JVC KW-NT500HDT GPS Receiver User Manual


 
60
ENGLISH
SD/USB operations
USB
Do not connect 2 or more USB hubs to the USB cable of the unit.
HUB
USB
USB
USB
HUB
USB
USB
USB
USB
USB
USB
HUB
U
If you connect a USB device with large consumption current to the USB hub, it may not operate. In this case,
connect the device directly to the USB cable.
When connecting via a USB hub, connect the USB hub to the USB cable first, then connect the USB device to
the USB hub.
Avoid using the USB device if it might hinder your safety driving.
Disconnect a USB device while playback is paused or another source is selected.
Electrostatic shock at connecting a USB device may cause abnormal playback of the device. In this case,
disconnect the USB device. Turn off the unit, then turn on again.
Do not leave a USB device in the car, expose to direct sunlight, or high temperature to avoid deformation or
cause damages to the device.
You can connect USB devices and iPod/iPhone to the same USB hub.
This unit cannot recognize a USB device whose rating is other than 5 V and exceeds 1 A.
USB devices equipped with special functions such as data security functions cannot be used with the unit.
Depending on the shape of the USB devices and connection ports, some USB devices may not be attached
properly or the connection might be loose.
This unit may be unable to play back some USB devices or some files due to their characteristics or recording
conditions.
While playing from a USB device, the playback order may differ from other players.
This unit may be unable to play back some USB devices or some files due to their characteristics or recording
conditions.
This unit may not play back files in a USB device properly when using a USB extension cord.
This unit cannot assure proper functions or supply power to all types of the devices.
SD
This unit can play back microSD or microSDHC.
Caution: