Filter
Top Products
AJ-V8/5HP24
72
Service Tools
New Tools
The table below lists the new service tools required for the AJ V8 engine. These are in addition to the
tools already in use on 6 and 12 cylinder engines, some of which can also be used on the AJ V8.
Details of new service tools for the 5HP24 transmission will be supplied at a later date.
Part Number Description
JD 215 Camshaft setting/locking tool
JD 216 Crankshaft setting/locking peg
JD 217 Timing chain tensioner tool
JD 218 Timing chain wedges (2 each)
JD 220 Dummy main bearing caps (5 each)
JD 221 Bore protector - connecting rod installation (2 each)
JD 222 Engine rear lifting brackets (1 pair)
JD 223 Engine stand mounting brackets (1 pair)
JD 229 Crankshaft rear oil seal remover/replacer
JD 230 Belt tensioner release tool
JD 231 Fuel injector remover
JD 232 Valve lifter hold-down tool
JD 233 Fan nozzle air gun
JD 234 Crankshaft front oil seal remover
JD 235 Crankshaft front oil seal replacer
MS 76-140-5 Valve seat 5 mm pilot (for use with existing MS 76 valve seat cutter tools)
18G 1437-2 Adapter (for use with existing front pulley lock tool 18G 1437)
- Cranked 13 mm box wrench, for starter motor upper securing bolt (eg. Snap-on part
number CXM 1113)
- Spring band hose clamp pliers (eg. Snap-on part number HCP 20)
- Torque/Angle disc, for yield tightening of bolts (eg. Snap-on part number TA 360)
- Valve seal pliers (eg. Snap-on part number YA 8230)
- 24 mm, 0.375 inch drive, open wrench, for knock sensors (eg. Snap-on part number
FCOM 24)
- 8 inch long, 0.375inch drive, angle extension, for use with 24 mm open wrench
(eg. Snap-on part number FXW 8)