Filter
Top Products
EngineAJ-V8/5HP24
32
Induction Elbow
The induction elbow provides the interface
between the electronic throttle and the intake
manifold. Connections on the induction elbow
provide vacuum take-offs for various services. A
boss on the rear of the elbow accommodates the
EGR valve.
Intake Manifold
The intake manifold is manufactured in
composite, with integrated composite fuel rails
and metal thread inserts. Individual ducts lead off
a central chamber to the inlet ports of each
cylinder.
Silicon rubber gaskets, located in channels in the
intake manifold, seal the joints between the ducts
and the cylinder heads.
Fuel Tank Vacuum
and Pressure Relief
Valve Connection
Part Load Breather/
EVAP Valve Vacuum
Connection
Brake Booster
Vacuum Connection
Fuel Pressure
Regulator/
Cruise Control
Vacuum
Connection
303-033
INDUCTION ELBOW
SECTION THROUGH INTAKE MANIFOLD
303-051