Filter
Top Products
EngineAJ-V8/5HP24
10
Starter and Drive Plate
The engine starter motor is installed at the rear
right side of the engine, at the cylinder block to
bedplate split line (for further details of the
starter motor see Technical Guide, XK8
Introduction).
The starter drive plate is attached to the rear of
the crankshaft. A timing disc, for the engine
speed sensor, is spot welded to the front face of
the drive plate.
STRUCTURAL SUMP AND OIL PAN
STARTER MOTOR
303-062
Torque
Converter
Access
303-010