Insignia NS-CNV43 GPS Receiver User Manual


 
9
Insignia NS-CNV43 GPS
www.insigniaproducts.com
Inserting the Micro SD Memory Card and SIM Card
The unit is designed with micro SD and SIM Card slots, which let you insert
a Micro SD memory card and a SIM card into the GPS unit.
The Micro SD memory card contains the software to operate your GPS and
the SIM card allows the GPS to receive real-time messages and display
them on the LCD screen.
To insert the Micro SD memory card and SIM card:
1 Open the Micro SD/SIM card compartment by sliding the cover in the
direction indicated by the “OPEN” arrow.
2 Open the Micro SD Card slot by sliding it in the direction of the “OUT”
arrow.
3 Insert the Micro SD Card into the Micro SD Card slot with its gold
contacts facing down (the cut-off corner of the micro SD card should
match the cut-off corner in the slot).
4 Gently slide the Micro SD Card latch in the direction of the “IN” arrow
to lock it into place.
5 Insert the SIM Card into the SIM Card slot with its gold contacts facing
down.
6 Gently slide the SIM Card latch in the direction of the “LOCK” arrow to
lock it into place.
Note
You should power off the unit when installing these cards.
Note
The GPS software will not work unless the Micro SD card
(included) is inserted.
NS-CNV43_09-0696_MAN_ ENG_V1.fm Page 9 Saturday, September 5, 2009 9:07 AM