10
Insignia NS-CNV43 GPS
www.insigniaproducts.com
Mounting your GPS in a vehicle
When you use your GPS in a vehicle, you can use the supplied mounting
bracket and cradle.
To mount your GPS in a vehicle:
1 Slide the mounting cradle onto the end of the mounting bracket to
secure it.
2 Set the bottom edge of the GPS onto the mounting cradle. Then push
the retaining bracket at the top of the mounting cradle (1) toward the
GPS unit. To remove the unit, push the retaining bracket at the top of
the mount cradle toward the back of the GPS.
3 Lift the suction cup lever, then press the suction cup to the windshield.
Press down on the suction cup lever (2) to secure the bracket to the
windshield.
4 Rotate the mounted GPS (3) to a comfortable viewing position.
Warnings
• The assembly must not be mounted so that it impairs the
driver’s view of the road.
• Make sure that your car’s airbags are not obstructed by
the GPS.
3
NS-CNV43_09-0696_MAN_ ENG_V1.fm Page 10 Saturday, September 5, 2009 9:07 AM