Filter
Top Products
52
NS-CNV20
www.insignia-products.com
2 Touch the green arrow on the right. The Bluetooth
enable/disable screen opens.
3 Touch enable, then touch the back arrow at the
bottom of the screen.
4 Touch PIN Number to display the keypad, then type
your phone's PIN number. The default PIN number
for many Bluetooth devices is 0000.
As a security feature, you must set up your phone to
scan for the GPS device within two minutes or your
setup process will time-out.
5 Touch Save after you enter the number. The screen
returns to the Bluetooth management screen.
If you have not set your phone to pair with a
Bluetooth device, the screen indicates “No phone
connected.”
NS-CNV20 - 08-1418 - A6.fm Page 52 Wednesday, August 27, 2008 8:14 AM