Humminbird 998c SI GPS Receiver User Manual


 
25
Views
Views
The sonar and navigation information from your Fishing
System are displayed on the screen in a variety of easy-to-
read views. Many of these views are also available as a
Combo View, which shows two views on the screen at the
same time.
Default View: When you first power up the control head, Chart/Side
Combo View will be the default view for the 898c SI and 998c SI
Combo units. Sonar/Chart View will be the default view for the 858c
and 958c. Down Imaging™ View will be the default view for the 858c
DI and 958c DI.
Available Views: The available Views on your Humminbird® unit will
vary with the model and the transducer attached to your control head.
Side Imaging® Views are only available in the 898c SI and 998c SI
Combo units. Down Imaging™ Views are only available in the 858c DI,
958c DI, 898c SI, and 998c SI Combo units. Side Beam View is only
available whenan optional-purchase QuadraBeam PLUS™ transducer is
attached to the control head. See Views Menu Tab and the following
pages for more information.
Cycle: When you press the VIEW key repeatedly, the display cycles
through the available views on your screen. When you press the EXIT
key, the display cycles through the available views in reverse order.
Customize: You can display or hide any view to suit your fishing
preferences. See the following pages for more information about each
View.
To customize your view rotation:
You can choose which views are hidden or visible in your view rotation.
1. Press the MENU key twice to access the tabbed Main Menu, then
press the RIGHT Cursor key until the Views tab is selected.
2. Press the UP or DOWN Cursor keys to select a View.
3. Press the LEFT or RIGHT Cursor keys to change the status of the view
from Hidden to Visible or vice versa.
To program each PRESET key:
Another way to access your favorite views quickly is to store them on the
VIEW PRESET keys. Instead of using the VIEW key to cycle through every view
to find the one you want, you can program the VIEW PRESET keys to display
a specific view immediately.
1. Press the VIEW key to cycle to the view you want to store.
2. Press and hold one of the VIEW PRESET keys for several seconds. A
chime will indicate that the view has been saved. You can store up to
three views, one on each key.