Humminbird 531324-1_D GPS Receiver User Manual


 
3
Handheld GPS Connection Kit
The Humminbird® Handheld GPS Connection Kit includes the following items:
Handheld GPS Cable (NMEA data connection and optional 12 VDC power connection)
Y-cable for multiple accessory attachment (NMEA and ACCY connections)
Handheld GPS Connection Kit Accessory Manual
NOTE:
You may have purchased either a direct-connect NMEA data cable, or one that requires
splicing to an additional NMEA data cable (made by the manufacturer of the Handheld GPS receiver)
to complete the connection to the Handheld GPS receiver.
NOTE:
The AS-HHGPS accessory requires the purchase of an additional NMEA data cable (made
by the manufacturer of the Handheld GPS Receiver) to complete the connection to the Handheld
GPS Receiver.
Direct-connect Cable Installation (AS HHGAR082, AS HHMAG344)
Use the following instructions to direct-connect your Handheld GPS Receiver to your
Fishing System.
1. Insert the Handheld GPS Cable’s
NMEA-COM connector into the
appropriate terminal slot on the back
of your Fishing System control head.
The slots are keyed to prevent reverse
installation, so be careful not to force
the connector into the holder.
NOTE:
If the terminal slot is already used by
another accessory, you will need to replace
it with the included Y-cable. After you’ve
inserted the Y-cable’s COM-connector into
the appropriate terminal slot on the back of
your Fishing System control head, connect
the Handheld GPS Cable to the NMEA-COM
connector, and attach your accessory cable
to the ACCY-COM connector.
2. Connect the Handheld GPS Cable to
your Handheld GPS Receiver. Refer
to your Handheld GPS Receiver
manufacturer’s user manual for
instructions.