Filter
Top Products
Save, Edit, or Delete a Waypoint
Save your current position as a waypoint: On any view, press the MENU key to display the X-
Press
TM
Menu. Select Mark and press the RIGHT Cursor key to save the current position of the boat
as a waypoint.
Save the cursor position as a waypoint: On the Track or Combo View, use the 4-WAY Cursor
Control key to designate the position you want to save as a waypoint. Then press the MENU key
to display the X-Press
TM
Menu. Select Mark and press the RIGHT Cursor key to save the current
position of the boat as a waypoint.
Save a position from the sonar history: On any Sonar View, use the 4-WAY Cursor Control key
to point to a feature in the sonar history (also called the Sonar Saver feature). Then press the
MENU key to display the X-Press
TM
Menu. Select Mark and press the RIGHT Cursor key to create
a waypoint at the location where that sonar reading was taken. The new waypoint will also
record the depth at that location.
NOTE: When you save a waypoint by any of these methods, a numerical waypoint name is
automatically assigned. You can edit the waypoint information later to give it a different name and
select an icon to represent it (see Navigation Menu Tab, Waypoint Submenu).
Display the Waypoints Submenu: From any view,
press the MENU key twice to display the Main Menu
System, then use the RIGHT Cursor key to select the
Navigation tab. Select Waypoints and press the RIGHT
Cursor key to display the Waypoints submenu.
Program a specific position as a waypoint: To create a
waypoint that is NOT your current position, from the
Waypoints submenu, select the Create option and press the RIGHT Cursor key. Use the 4-WAY
Cursor Control key to program a waypoint name, latitude, longitude, and icon before selecting Save.
Edit a waypoint: From the Waypoints submenu, select Edit and press the RIGHT Cursor key to
display a list of saved waypoints. Select the waypoint you want to edit and press the RIGHT
Cursor key. Use the 4-WAY Cursor Control key to move from field to field, and the UP and DOWN
Cursor keys to changes values once you are in a field. In the Waypoint Name, Latitude and
Longitude fields, use the UP and DOWN Cursor keys to change the letter or number. All upper
and lower case letters are available, as well as digits 0-9 and some punctuation characters. In
the Waypoint Icon field, use the UP and DOWN Cursor keys to change the icon used to
represent the waypoint on the Combo and Track Views. You can exit these fields with the LEFT
and RIGHT Cursor keys or by pressing the EXIT key. Select Save and press the RIGHT Cursor key
to save your changes.
Waypoints Submenu
13