Humminbird 531324-1_D GPS Receiver User Manual


 
22
G
PS Diagnostic View shows a sky chart and numerical data from the GPS receiver. The sky chart
shows the location of each visible GPS satellite with its satellite number and a signal strength
bar. A dark grey bar indicates that the satellite is being used to determine your current position.
A light gray bar indicates that the satellite is being monitored, but is not yet being used.
NOTE: The GPS Diagnostic View only appears if the GPS Receiver is connected.
This view also reports the current position, local time and date, and other numeric information.
The current GPS Fix Type is reported as No Fix, 2D Fix, 3D Fix, or Enhanced. An Enhanced fix has
been augmented using information from WAAS, EGNOS, or MSAS. A 3D or Enhanced Fix is
required for navigation. HDOP (the Horizontal Dilution of Precision) is a GPS system parameter
which depends on the current satellite configuration. HDOP is used to calculate the Estimated
Position Error.
PC Connect
(With PC Connect Cable Only)
Use PC Connect to update the software of the Fishing System control head. This feature
requires the use of the PC Connect Cable. Complete instructions are included with the PC
Connect Cable accessory.
NOTE: The PC Connect Cable requires a separate purchase. For more information visit our website at
www.humminbird.com or contact our Customer Resource Center at 1-800-633-1468.
Exit PC Connect mode by powering the Fishing System off.
GPS Diagnostic View
Satellite Being
Monitored
Satellite
Being Used
Current Latitude
and Longitude
Sky Chart