Filter
Top Products
30
© 2002 directed electronics, inc.
Program switch. Press it one time and release it to advance from
Channel One to Channel Two. Now, press and hold the
Program switch. The LED will flash two times. As before, do not
release it.
If you want to program Channel Three after programming
Channel One, release the Program switch, press it twice and
release it to advance to Channel Three. Then press it once more
and hold it. The LED will flash three times to confirm it is ready
to receive the code from the transmitter.
Learn Routine will be exited if:
➤ Ignition is turned off.
➤ Program switch is pressed too many times.
➤ More than 25 seconds elapses between programming steps.
uussiinngg yyoouurr ssyysstteemm
locking/arming
Pressing for one second will lock the doors. The parking
lights will flash once to confirm that the doors are locked.
note: Power door lock control is an optional feature.
Extra parts and labor may be necessary for your system to
interface with your vehicle’s power door locks.
➜