Filter
Top Products
29
© 2002 directed electronics, inc.
2.
CChhoooossee..
Within 10 seconds, press and
release the Program switch the number of
times corresponding to the desired channel
listed below. Once you have selected the
channel, press the switch once more and hold
it. The LED will flash to confirm the selected
channel. Do not release the Program switch.
3.
TTrraannssmmiitt..
While holding the Program
switch, press the button on the transmitter
that you would like to control the selected
receiver channel.
4.
RReelleeaassee..
Once the code is learned, the
Program switch can be released.
You can advance from programming one channel to another by
releasing the Program switch and tapping it to advance steps and
then holding it. For instance: You have programmed Channel
One and you want to program Channel Two. Release the
CChhaannnneell nnuummbbeerr FFuunnccttiioonn
1 Lock/Unlock
2 Timer Mode
3 Remote Start