Harman-Kardon TC300 Automobile Accessories User Manual


 
Remote-on
Option
I
:
Connect the antenna power lead
Option
2:
Wire a switch in the passenger
Many head units provide a remote-on lead,
to the Remote terminal on the TC Series compartment to switch the positive
which connects directly to the Remote
amplifier.
Note:
This configuration may terminal on the battery (+12V) to the
connector on your TC Series amplifier.
require that you have the power to the Remote terminal on the amplifier.
Turning on your head unit will. in turn,
radio on when you play a tape or CD. Alternatively, you can use the accessory
automatically turn on the amplifier. If your
position on the ignition switch to switch
head unit does not have a remote-on lead.
+
12V to the Remote terminal.
you can still wire your system for remote
turn-on by using one of these options: