Filter
Top Products
Connecting the TC-series amplifier
This section is divided into four separate
General information
Connection tips:
parts:
1. General information
2.
Power connections
3.
Audio input connections (from the head
unit to the amplifier)
4. Speaker output connections (from the
amplifier to the speakers)
Please
be
sure you read all four parts to
ensure that your amplifier is connected
properly.
DISCONNECT THE BATTERY'S
NEGATIVE
(-)
TERMINAL BEFORE
YOU BEGIN YOUR INSTALLATION,
AND DO NOT RECONNECT IT
UNTIL YOU ARE COMPLETELY
FINISHED!
Do not connect the main positive lead
(B+) from the amplifier to the battery
until after all other connections have been
made.
Use the proper gauge of wire:
I0
gauge or
larger from the amplifier to the battery,
and 18 gauge or larger from the amplifier
to the speakers.
If you choose to use crimp-type connec-
tors in your system, use high-quality
connectors of the proper size, and crimp
them correctly to ensure optimum
electrical contact.
Be sure to solder any splices in your wire,
and seal the splice with heat-shrink tubing
or electrical tape.