Harman-Kardon GPS-810 GPS Receiver User Manual


 
Initial Setup
When you turn your GPS-810 on for the first time, the Setup Wizard will
appear. The Wizard will guide you through the GPS-810’s initial setup steps:
When you touch the N
EXT button on the PLEASE SET THE TIME screen, the
GPS-810 will display the N
AVIGATI ON screen (see page 9).
NOTE: Once you complete these initial setup steps, the Setup Wizard will not reappear.
To change any of the GPS-810’s settings, see CHANGING SETTINGS, on page 27.
User Manual
8
ediug
+yalp
GPS-810
1. Touch the button for the
screen language you want to
use (English, French or
Spanish).
Touch the N
EXT button.
2. Touch the button for the
distance units you want to
use (kilometers/meters, miles/
feet or miles/yards).
Touch the N
EXT button.
3. Touch the button for the
time zone where you are
located.
Touch the N
EXT button.
4. Set the current local time.
You can also set the clock
to display either 12-hour or
24-hour time. (Note that
after you initially set the
time, the GPS-810 will auto-
matically update the time
according to the GPS signals
it receives.)