Filter
Top Products
Audio Out
The Audio Out button lets you adjust the Volume Mixer and the FM Settings
(below, left).
V
OLUME MIXER: Lets you adjust the relative volume levels of the navigation
voice guidance, music and video files and cell phone (above, right). Touching
each button displays a volume adjustment screen for that function.
FM S
ETTINGS: The GPS-810 contains an FM transmitter that will ‘broadcast’
its audio to your vehicle’s FM radio, providing much better sound than is
possible through the GPS-810’s built-in speaker. To use this you need to find
an FM frequency that’s not being used in your area (If you use an FM channel
that is being used by a local broadcaster it will interfere with the sound of
your GPS-810.)
1. Turn your vehicle’s radio on and tune through its FM channels to find one
(between 88.1MHz and 107.9MHz) that is not broadcasting in your area.
2. Once you have located an
FM channel that is not
broadcasting in your area,
save it as a preset on your
vehicle radio. This
will become your GPS-810
preset.
3. Touch the FM SETTINGS
button, then touch the TURN
TRANSMITTER ON button. The
FM Settings screen will be displayed (above).
4. Use the arrow buttons to set the frequency to one that matches the
channel that you preset on your vehicle radio in Step 2 (below, left).
5. Touch the first empty preset button for at least 3 seconds to set the FM
frequency (below, right).
6. To listen to your GPS-810 through your vehicle’s FM radio, turn your
GPS-810 on, then your vehicle’s FM radio on and press the GPS-810 preset
you set in Step 2.
User Manual
ediug
+yalp
™
GPS-810
29