Harman-Kardon GPS-810 GPS Receiver User Manual


 
Using With a Bluetooth Phone
Your GPS-810 has calling features that can be used with a Bluetooth-
enabled phone. Before using the GPS-810’s phone features, please read
the instructions for your particular Bluetooth phone.
NOTE: The very first time you touch the PHONE button the GPS-810 will take you through
the Cell Phone Setup procedure. See page 6 of the Quick-Start Guide included with your
GPS-810 for details.
To Connect to a New Phone
IMPORTANT: The exact connection procedure may vary somewhat among different
Bluetooth-enabled phones. When attempting to connect to a new phone be sure to
follow the screen prompts on both the GPS-810 and the Bluetooth-enabled phone.
1. Turn your Bluetooth-enabled
phone ON and put it in
Pairing (or Discovery) mode.
2. Touch the P
HONE button on
the SOURCE screen (see page
19). The C
ELL PHONE screen
(right) appears.
3. Touch the M
ANAGE CONNECTION
button. The MANAGE CONNECTION
screen (below, right) appears.
4. Touch the C
ONNECT TO A NEW
PHONE
button. The CELL
PHONE SETUP screen (bottom,
right) appears.
5. Place the Bluetooth-enabled
phone into the Pairing mode
(this may require entering a
passkey number, typically “0-
0-0-0”).
5. Touch the S
EARCH button
and follow any screen
prompts. When the GPS-810
connects to your phone it will
attempt to import its phone
book. (Phone book compati-
bility varies among different
Bluetooth phones.)
You can now place and receive
calls using your GPS-810.
User Manual
26
ediug
+yalp
GPS-810