Filter
Top Products
TO TRANSFER FILES TO THE GPS-810 IN MTP MODE:
1. Insert an SD card into the GPS-810’s SD card slot (see page 4).
2. Make sure the USB cable is disconnected from the GPS-810.
3. Set the GPS-810’s USB mode to MTP (see page 20).
4. Connect the GPS-810 to your
computer’s USB hub (right).
5. Launch your computer’s
Windows Media Player.
6. Locate the files you want to
transfer.
7. Select Windows Media
Player’s S
YNC mode (see
below).
8. Drag the files you want to transfer into the Windows Media Player S
YNC LIST
(see below).
9. Select S
TAR T SYNC and wait for the process to finish (see below).
NOTE: Your Windows Media Player screen may look different from the example.
Once the Sync is finished, you can unplug the GPS-810 from your computer
and watch or listen to the files on it. (See Listening to Music, on page 23, and
Watching Videos, on page 24).
User Manual
ediug
+yalp
™
GPS-810
21
7. Select S
YNC
Mode
8. Drag Title to Sync List
9. Select S
TART
S
YNC