Filter
Top Products
SKU 02575 For technical questions, please call 1-800-444-3353. Page 7
To Assemble the Frame and Tongue:
Position the Right Side Rail (1R) and Left Side Rail (1L) parallel and aligned with
one another. (See Figure A.)
Align the mounting hole located at each end of a Cross Member (2) with the mount-
ing hole located in one end of the Right Side Rail (1R) and one end of the Left Side
Rail (1L). On each end insert one 3/8” x 7/8” Carriage Bolt (A) upward from the
underside of the aligned mounting holes, and secure the Cross Member to the
Right Side Rail and Left Side Rail with one Washer (C) and one Nut (B).
(See Figure A.)
RIGHT SIDE RAIL (1R)
REAR CROSS MEMBER
(3)
CROSS MEMBER
(2)
CROSS MEMBER
(2)
LEFT SIDE RAIL (1L)
RIGHT CONNECTING
RAIL (8)
TOW BAR (9)
COUPLER
(12)
LEFT CONNECTING RAIL (7)
SAFETY CHAIN
(10)
TO CONNECT COUPLER
TO TOW BAR USE:
BOLT (V)
NUT (B)
FOR ALL OTHER
CONNECTIONS USE:
BOLT (A)
WASHER (C)
NUT (B)
FIGURE A
Align the mounting hole located at each end of the remaining Cross Member (2)
with the mounting hole located in the center of the Right Side Rail (1R) and the
center of the Left Side Rail (1L). Insert one 3/8” x 7/8” Carriage Bolt (A) upward
from the underside of the aligned mounting holes in the Cross Member and Right
Side Rail, and secure the parts with one Washer (C) and one Nut (B). Repeat this
Step for the other end of the Cross Member and the Left Side Rail.
(See Figure A.)
1.
2.
3.