Filter
Top Products
SKU 02575 For technical questions, please call 1-800-444-3353. Page 3
SPECIFICATIONS
Maximum Payload Capacity 1400 Pounds (dead weight)
Bed Size 40” x 50”
Overall Dimensions 87-1/2” L x 52-3/4” W x 22-3/4” H
Tire Size & Type 4.80 x 12”, 4 Ply, Tubeless
Tongue Level Height 14” From Ground
Ball Coupler Size 1-7/8”
Construction Formed and Welded Steel
Net Weight 195 Pounds
Save This Manual
You will need this manual for the safety warnings and precautions, assembly, oper-
ating, inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep this manual and invoice in a safe and dry place for future reference.
GENERAL SAFETY WARNINGS AND PRECAUTIONS
KEEP WORK AREA CLEAN AND DRY. Cluttered, damp, or wet work areas invite
injuries.
KEEP CHILDREN AWAY FROM WORK AREA. Do not allow children to play on
this product.
STORE IDLE EQUIPMENT. When not in use, tools and equipment should be stored
in a dry location to inhibit rust. Always lock up tools and equipment, and keep out
of reach of children.
DO NOT USE THIS PRODUCT IF UNDER THE INFLUENCE OF ALCOHOL OR
DRUGS. Read warning labels on prescriptions to determine if your judgement or
reflexes are impaired while taking drugs. If there is any doubt, do not attempt to
use this product.
USE EYE AND HAND PROTECTION. Wear ANSI approved safety impact eye
goggles when assembling this product. ANSI approved safety impact eye goggles
are available from Harbor Freight Tools.
DRESS SAFELY. Do not wear loose clothing or jewelry, as they can become
caught in moving parts. Wear a protective hair covering to prevent long hair from
becoming caught in moving parts. If wearing a long-sleeve shirt, roll sleeves up
above elbows.
DO NOT OVERREACH. Keep proper footing and balance at all times to prevent
tripping, falling, back injury, etc.
INDUSTRIAL APPLICATIONS MUST FOLLOW OSHA REQUIREMENTS.
1.
2.
3.
4.
5.
6.
7.
8.