Filter
Top Products
SKU 02575 For technical questions, please call 1-800-444-3353. Page 10
To Attach the Fenders:
Align the two mounting holes in a Fender (13) with the two mounting holes located
in the side, mid-section of the Left Side Rail (1L). Then secure the Fender to the
Left Side Rail with two Bolts (A), two Washers (C), and two Nuts (B).
Align the two mounting holes in the remaining Fender (13) with the two mounting
holes located in the side, mid-section of the Right Side Rail (1R). Then secure the
Fender to the Right Side Rail with two Bolts (A), two Washers (C), and two Nuts
(B).
To Attach the Side Running Lights:
Align the two mounting holes in a Side Running Light (26) with the two mounting
holes located in the side, forward section of the Left Side Rail (1L). Then, secure
the Side Running Light to the Left Side Rail with two Self-Tapping Screws (J).
Align the two mounting holes in the remaining Side Running Light (26) with the
two mounting holes located in the side, forward section of the Right Side Rail (1R).
Then, secure the Side Running Light to the Right Side Rail with two Self-Tapping
Screws (J).
To Attach the Tail Light Bracket and License Plate Bracket:
Align two of the mounting holes in a Tail Light Bracket (24) with the two mounting
holes located in the side, rear section of the Left Side Rail (1L). Then, secure the
Tail Light Bracket to the Left Side Rail with two Bolts (A), two Washers (C), and two
Nuts (B).
Align two of the mounting holes in the remaining Tail Light Bracket (24) with the two
mounting holes located in the side, rear section of the Right Side Rail (1R). Then,
secure the Tail Light Bracket to the Right Side Rail with two Bolts (A), two Washers
(C), and two Nuts (B).
To Attach the Tail Lights:
See Wiring Diagram on page 15. Insert the two threaded mounting bolts of the
Left Tail Light (25L) through the mounting holes located in the License Plate Bracket
(30) and Tail Light Bracket (24). Then, secure the Left Tail Light with light nuts.
Insert the two threaded mounting bolts of the Right Tail Light (25R) through the
mounting holes located in the Tail Light Bracket (24) which was pre-assembled on
the Right Side Rail (1R). Then, secure the Left Tail Light with light nuts.
1.
2.
1.
2.
1.
2.
1.
2.