Filter
Top Products
20 Navus 2 Owner’s Manual
aPPendIx
E
N
aPPENdIx
Resetting Your Navus 2
If your unit locks up (freezes up), press
and hold the Power button to turn off
the unit. Then turn the unit back on. If
this does not help, reset your Navus 2.
To reset the Navus 2:
1. Place your thumb nail in the groove
under the top edge of the faceplate.
2. Gently pull off the faceplate.
Reset
button
Power button
Faceplate
Groove
3. Press the Reset button.
4. Connect the Navus 2 to a power
source using the power cable. The
Navus 2 should automatically turn
back on and operate normally.
NOTE: If you need to reset your unit
often, update the system software.
See page 23 for information about
updating the software.
Caring for Your Navus 2
Your Navus 2 contains sensitive
electronic components that can be
permanently damaged if exposed
to excessive shock or vibration. To
minimize the risk of damage to your
Navus 2, avoid dropping your unit and
operating it in high-shock and high-
vibration environments.
Cleaning the Unit
The Navus 2 is constructed of high-
quality materials and does not require
user maintenance other than cleaning.
Clean the unit’s outer casing (not the
touch screen) using a cloth dampened
with a mild detergent solution, and
then wipe dry. Avoid chemical cleaners
and solvents that can damage plastic
components.