Filter
Top Products
Garmin © 2005 55 nüvi Owner’s Manual
APPENDIX
USB Interface Troubleshooting
Problem/Question Solution/Answer
How do I know my nüvi
is in USB Mass Storage
Mode?
When your nüvi is in USB Mass Storage Mode, a picture of a nüvi
connected to a computer is shown. Also, you should see a new
Removable Disk Drive listed in My Computer.
My computer never
senses that the nüvi is
connected.
1. Unplug the USB cable from your computer.
2. Turn the nüvi off and then back on again.
3. Plug the USB cable into your computer. The nüvi automatically
turns on and goes into USB Mass Storage Mode.
I cannot find any drives
named “nuvi” in my list
of drives.
Try the solution listed above.
If you have several network drives mapped on your computer,
Windows may have trouble assigning drive letters to your nüvi drives.
Follow the steps on the
following page to assign your drive letters.
I keep getting a message
saying “Unsafe Removal
of Device” when I unplug
the USB cable.
When you are ready to disconnect your nüvi from your computer,
double-click the Unplug or Eject icon in your system tray. Select
“USB Mass Storage Device” and click Stop. Select the nüvi drives and
click OK. You can disconnect your nüvi from your computer now.
How can I rename my
nüvi drives?
1. Open My Computer.
2. Select the drive you want to rename.
3. Right-click your mouse and select
Rename.
4. Type the new name and press the
Return key.