Filter
Top Products
Garmin © 2005 47 nüvi Owner’s Manual
APPENDIX
APPENDIX
Mounting Your nüvi
For a tight grip, clean and dry your windshield before mounting the suction cup.
To mount the suction cup mount:
1. Place the suction cup on the windshield.
2. Flip the lever back, toward the windshield.
3. Open the antenna. Fit the bottom of your nüvi into the cradle.
4. Tilt your nüvi back until it snaps in place. If necessary, rotate the cradle.
5. Plug the small end of the cable into the back of the mount; plug the other end into a 12/24-
Volt receptacle in your vehicle.
➌
➍
➊
➋
windshield
➎
Mount the Suction Cup Mount
Place the nüvi in the Mount
Plug in the Cable