Filter
Top Products
Garmin © 2005 48 nüvi Owner’s Manual
APPENDIX
Mounting the nüvi on Your Dashboard
Use the enclosed mounting disk to mount your unit to the dashboard. California drivers, use the enclosed
disk to comply with California regulations: see the nüvi Product Information Sheet that came in the box
for more information.
Important: The permanent mounting adhesive is extremely difficult to remove after it is installed.
To install the mounting disk:
1. Clean and dry the dashboard where you will
place the disk.
2. Remove the backing from the permanent
mounting adhesive on the bottom of the disk
and place the disk on the dashboard.
3. Place the suction cup mount on top of the
disk
4. Flip the suction lever down to secure the
suction cup mount to the disk.
Disk
Suction
cup mount
Suction
lever