Filter
Top Products
Page 2-6 GDU 37X Installation Manual – GDU 37X
Revision B 190-01054-01
2.6 Mounting Requirements
Refer to Appendix C for outline and installation drawings.
2.7 Unit Installation
The GDU 37X is installed by holding the unit flush with the instrument panel and fastening the four
captured 3/32” hex socket head screws to the panel as shown in Figure C-1.1 and C-1.2.
2.8 Continued Airworthiness
Maintenance of the GDU 37X is “on condition” only. Periodic maintenance of the GDU 37X is not
required. Instructions for Continued Airworthiness (ICA) are not required for this product under 14 CFR
Part 21 since the GDU 37X has received no FAA approval or endorsement.