Filter
Top Products
StreetPilot 7200/7500 Owner’s Manual 59
APPENDIX
USB Interface Troubleshooting
Problem/Question Solution/Answer
How do I know my
StreetPilot is in USB Mass
Storage Mode?
When your StreetPilot is in USB Mass Storage Mode, a picture of a StreetPilot
connected to a computer is shown. Also, your computer should show a new
Removable Disk drive listed in My Computer.
My computer never
senses that the StreetPilot
is connected.
1. Unplug the USB cable from your computer.
2. Load the USB drivers to your computer. See
page 21.
3. Plug the USB cable into your computer. Select USB Mass Storage.
I cannot find any drives
named “GARMIN” in my
list of drives.
Try the solution listed above.
If you have several network drives mapped on your computer, Windows may have
trouble assigning drive letters to your StreetPilot drives. Follow the steps on the
next page to assign your drive letters.
A message saying
“Unsafe Removal of
Device” appears when I
unplug the USB cable.
When you are ready to disconnect your StreetPilot from your computer, double-
click the Unplug or Eject icon in your system tray. Select “USB Mass Storage
Device” and click Stop. Select the StreetPilot drives and click OK. You can
disconnect your StreetPilot from your computer now.