Filter
Top Products
22 StreetPilot 7200/7500 Owner’s Manual
LOADING FILES ON YOUR STREETPILOT
Step 4: Connect the USB Cable
Use the USB cable provided to connect your StreetPilot
to your computer. Also use the USB cable when updating
the StreetPilot software or loading additional maps.
To
connect your StreetPilot to your computer:
1. Plug the small end of the USB cable into the
connector located on the side of your StreetPilot.
2. Connect the larger end of the USB cable to an
available USB port on your computer.
Connecting the USB Cable
Step 5: Select USB Mass Storage
After connecting the USB cable to the StreetPilot and
your computer, press the Power button on the front
of the StreetPilot to turn it on. The following screen
appears:
To transfer files to your StreetPilot, touch USB Mass
Storage.
If you would like to use MapSource or update your
software, touch Garmin Mode.