Filter
Top Products
StreetPilot 7200/7500 Owner’s Manual 57
APPENDIX
Updating the Software
Use WebUpdater to update your StreetPilot software. Go
to www.garmin.com/products/webupdater/ to download
the WebUpdater program. Then connect your StreetPilot
to your computer, run WebUpdater, and follow the screen
prompts. After confirming that you want to perform an
update, WebUpdater automatically downloads the update
and installs it to your StreetPilot.
If you register your StreetPilot, you will receive
notification of software and map updates. To register, go
to www.garmin.com/registration/selectreg.jsp.
You can also download software updates from
www
.garmin.com/products/sp7500 for the 7500 or www
.garmin.com/products/sp7200. Click Software Updates.
Click Download next to the unit software. Read and
agree to the terms. Click Download. Select Run (or
Open). Your software is updated.
Adding MapSource Maps
Check www.garmin.com/unlock/update.jsp to see if
an update for your map software is available. You can
also purchase additional MapSource maps from Garmin
and load them on your StreetPilot’s internal memory or
on an optional SD card. Follow the instructions in the
MapSource owner’s manual or Help file.
NOTE: You cannot overwrite the preloaded maps
that came with your unit.
Using an External GPS Antenna
Use an optional external GPS antenna when using the
unit in a vehicle with a coated windshield or an in-screen
heating system, which can block GPS signals. Connect
the antenna to the MCX connector located on the back
of the unit. To purchase, go to the Garmin Web site at
www.garmin.com/products/sp7500 for the 7500 and
www.garmin.com/products/sp7200 for the 7200. Click
Accessories.